TRUNCATED DOME TILES

Truncated-Dome-Tactile-Pedestrian-Warning-PanelsTruncated Dome Tactile Pedestrian Warning PanelsTruncated-Dome-Tactile-Pedestrian-Warning-Panels

  •  Dual use panel design allows the same panel to be used for surface applied and embedded applications ...for new and retrofit
  •  Truncated dome panels can be installed in almost any shape or configuration
  •  Simple add-on anchors mean more flexibility in planning installations and purchasing materials
  •  1.67" dome spacing from panel to panel. Standard base thickness is 1/8"
  •  Other thicknesses are also available on special orderTruncated-Dome-Tactile-Pedestrian-Warning-Panels-3
  •  All panels have easy egress beveled edges Five standard sizes: 24”x36”, 24”x48”, 24”x60”, 36”x48” and 36”x60”

 

 Truncated-Dome-Tactile-Pedestrian-Warning-Panels-4

 Truncated-Dome-Tactile-Pedestrian-Warning-Panels-5

  •  Meeting federal regulations is easy with ADA Answer Industries multi-use panels
  •  Truncated dome panels aid the visually impaired as they move from one surface level to another
  •  ADA Answer Industries truncated dome panels can be installed in almost any shape or configuration
  •  Visually impaired pedestrians appreciate the extra guidance and safety truncated dome panels provide

 

 

 

 

Part Number 01C-24C-1B 01C-24C-1G 01C-24C-1R 01C-24C-1Y 01C-25C-1Y 01C-25C-1Y 01C-25C-1G 01C-25C-1B
Description 2’ x 4’
- Black
2’ x 4’
- Dark Gray
2’ x 4’
- Brick Red
2’ x 4’
- Federal Yellow
2’ x 5’
- Brick Red
2’ x 5’
- Federal Yellow
2’ x 5’
- Dark Gray
2’ x 5’
- Black

 

SURFACE-APPLIED-ANCHORSSURFACE APPLIED ANCHORS

PART #01C-SF– This easy-to-use surface applied fastening system consists  of a Hilti HUD-1 universal anchor with a #10 x 1 1/2" stainless steel flathead square-drive screw. This is the recommended fastener for surface applied applications in concrete. Screw color matches panel color.

 

 

CAST-IN-PLACE-ANCHORSCAST-IN-PLACE ANCHORS  - Patent Pending

PART # 01C-CA – For cast-in-place applications, specially designed screw-on polypropylene anchors are attached to the back of the domed panels through pre-drilled and countersunk holes. The anchors extend 2-7/8" into the wet concrete. The substrate aggregate locks the anchor in place. Screw color matches panel color. The truncated dome panel may be removed and replaced if necessary for walkway repairs or other maintenance.

 

 

ANSWER-BOND-ADHESIVEANSWER BOND ADHESIVE

PART #01C-10A – This is a one-part, caulking gun applied, non-water activated, waterproof adhesive. No troweling is required. Once cured, its high tensile elastometric properties provide a tough, flexible, durable, tenacious bond. User-friendly...using low-odor technologies, once cured, it is not affected by moisture or water. One 10-ounce cartridge is required for each 15 square feet of panel, on average.

CARBIDE-TIPPED-COUNTERSINK-BITS

 

CARBIDE TIPPED COUNTERSINK BITS

PART #01C-CTCB – Use this carbide tipped tool to drill and countersink additional fastener locations in domed panels due to panels being cut to fit around curves or obstructions. Replacement bits available separately.

 

PANEL ALIGNMENT BRACKETS

PART NO. PAB – Simple to use brackets help maintain correct spacing of one panel to another, as well as keeping each panel flush with each other, and in perfect alignment. Use them for multiple cast-in-place panel installation. 8 1/2” long aluminum bracket provides long durability, and will not leave rust stains on the panels during installation.

PANEL-ALIGNMENT-BRACKETS-2

PANEL-ALIGNMENT-BRACKETS