FLEXIBLE CONTAINMENT

drip-dam-1Drip Damdrip-dam-3

Available in various and custom sizes, this funnel-style fast response tool will channel away liquids minimizing the risk of slip-and-fall injuries and contamination. A flowrate of over three (3) gallons per minute and a convenient hose connector with cap make containing and redirecting drips, drops, and leaks a breeze! Made of durable and resistant PVC, the Drip Dam is resistant to water, most chemicals, and punctures allowing for reuse and dependability. *Drain hose not included, fits 3/4” standard garden hose.drip-dam-2

 

 

 

 

Part# 48-33-LD48-33-LD48-310-LD48-55-LD48-66-LD48-610-LD48-612-LD48-1012-LD48-1212-LD48-1220-LD48-1818-LD48-2424-LD
Dimensions
3’x3’ 3’x6’ 3’x10’ 5’x5’ 6’x6’ 6’x10’ 6’x12’ 10’x12’ 12’x12’ 12’x20’ 18’x18’ 24’x24’
Weight
2 lbs. 3.5 lbs. 5 lbs. 4 lbs. 5 lbs 7 lbs. 7.5 lbs. 9 lbs. 10 lbs. 13.5 lbs. 14 lbs. 15 lbs.

 

Drip-Sentinel-Hose-BibbDrip Sentinel ™ Hose Bibb™

Safely wrap quick-disconnect fittings or other hose attachment ends to absorb small leaks when disconnecting hoses from industrial equipment. Integrated internal sorbent allows for containment up to 1 pint of oil, hydraulic fluid, or other hydrocarbons. Tether closure system holds the unit around the hose and fitting. Units are made of rugged and chemically resistant material. Lightweight and made in high visibility yellow.

Part Number

4701-YE (each)
4701-YE-BX (5/Box)

Dimensions .75” quick-disconnect fitting
Max Opening 2.5”
Absorbency 8 oz.
Holding Capacity 1 pt.
Regulations  EPA, SPCC & NPDES 

epa2

 

 

drip-sentinel-2

Drip Sentinel ™ Hose Wrap™

Contain leaky hose or fitting and prevent costly leaks and spills that can cause injuries to your workers with the ENPAC® Hose Wrap. Made of rugged and chemically resistant material and an integrated sorbent pad.HoseWrap™ will absorb leaks from hoses and fittings from 2” to 10” in size.Integrated sorbent pad absorbs hydrocarbons.

Model Fits HosesWeightRegulations
4702-YE 1.5”-3” .5 lbs. EPA, SPCC & NPDES
4704-YE 4”-5” 1.1 lbs. EPA, SPCC & NPDES
4706-YE 6”-8” 1 lbs. EPA, SPCC & NPDES
4710-YE 10” 1.1 lbs. EPA, SPCC & NPDES

 

 

Drip-Sentinel-Maintenance-Blanket-1
Drip Sentinel ™ Maintenance Blanket™

The ENPAC ® Maintenance Blanket™ is designed to be used under vehicles or leaking equipment. The sorbent blanket is made of 8 oz., 100 mils thick, non-woven geo-textile that is backed by a layer of 20-mil fuel/chemical resistant polyethylene. The blanket provides a protective sorbent pad between the maintenance item and placement area. The fabric backing provides an extra barrier that (unless punctured) stops any hydrocarbon from getting to ground. The blanket can be rolled or folded into a compact lightweight unit.

 

ModelDimensions                     Absorbency                         Weight                              Regulations                               
4720-BK 12’L x 3’W x 20 mil 6 gal. 6 lbs. EPA, SPCC & NPDES
4725-BK 12’L x 6’W x 120 mil 7 gal. 7 lbs. EPA, SPCC & NPDES
4730-BK 12’L x 9’W x 120 mil 8 gal. 9 lbs. EPA, SPCC & NPDES
4735-BK 12’L x 12’W x 120mil 9 gal. 10 lbs. EPA, SPCC & NPDES

 

 

epa2


DUCK-PONDS-MINI-BERM-CONTAINMENT-1DUCK PONDS MINI-BERM CONTAINMENT

 Our duck ponds are perfect for projects where storage space is limited. Small enough to fit in a cabinet or store on a shelf, a Duck Pond can hold various drum sizes with ease and affordability. Providing both reliable and reusable secondary containment foDUCK-PONDS-MINI-BERM-CONTAINMENT-2r oils, fluids, and gasolines; ponds are easy to maneuver and can withstand extreme cold temperatures to -55˚F/-48˚C. The uses are endless! For quick response to leaking machines, prevenative maintenance, and emergency drips, ponds are the perfect quick-grab item that is rugged and ideal for small areas for rapid deployment. Duck Ponds are available in various sizes, with a 4” low-profile sidewall, and are leak tested.

Great for:

  •  Quick use under leaking vehicles/machines
  •  Truck/Tractor emergency drips
  •  A low-sidewall pop-up pool alternative
  •  Changing oils/fluids
  •  Protecting bottom surfaces while dispensing
  •  Performing maintenance on any item that has a spill potential

 

 2’ x 2’2’ x 3’2’ x 4’3’ x 3’4’ x 4’4’ x 6’
Part Number                   5622-YE  5623-YE   5624-YE  5633-YE 5644-YE  5646-YE
Dimensions
2’ L x 2’ W x 4” H  2’ L x 3’ W x 4” H 2’ L x 4’ W x 4” H  3’ L x 3’ W x 4” H  4’ L x 4’ W x 4” H   4’ L x 6’ W x 4” H
Weight
 1 lbs. 3 lbs.   4 lbs.  5 lbs.  5.5 lbs.  7 lbs
Sump Capacity  10 gal.  15 gal.  20 gal. 22.5 gal.  40 gal.  60 gal.
Regulations  EPA, SPCC & NPDES  EPA, SPCC & NPDES   EPA, SPCC & NPDES    EPA, SPCC & NPDES EPA, SPCC & NPDES    EPA, SPCC & NPDES

 

epa2

Spillpal ™

 The most affordable, and convenient temporary storage. The flexible-sidewall SpillPal line is the easiest to use and the most affordable hazardous material storage product on the market today. SpillPal provides incidental spill control during temporary storage of drums, machine parts, tanks, and generators. It can also be used as a washdown pad or pumping station. A great alternative to hard plastic pallets, the ENPAC® SpillPal™ features foam sidewalls that easily spring back into place after any type of pressure is applied. With 6 configurations and custom sizes avalable, SpillPal™ is perfect for any job. Custom sizes available.

Store anything from one drum to two IBCs! Six models are available, each with optional grates. Reusable! When you’re done, just clean, fold, and place on a shelf! Frees up valuable floor space! No need for ramps. Flexible sidewalls spring back to form. Allows easy drive-in and driveout with a hand truck or forklift.

Spillpal-1

 1-Drum SpillPal2-Drum SpillPal4-Drum SpillPa4-Drum In-Line
SpillPal
6-Drum SpillPal8-Drum SpillPalGrates
Part Number                  5750-YE  5755-YE  5760-YE  5765-YE  5770-YE  5775-YE 7006-BK 
w/Grate(s)  5750-YE-G  5755-YE-G  5760-YE-G 5765-YE-G   5770-YE-G  5775-YE-G  -
Dimensions
 2’x2’x3”  2’x4’x3”  4’x4’x3”  2’x8’x3”  4’x6’x3” 4’x8’x3”  48”x23”x2” 
Weight  2 lbs. 4 lbs.  5 lbs.   6 lbs.  7 lbs. 9 lbs.  18 lbs. 
Sump Capacity  10 gal.  15 gal. 30 gal.  30 gal.  45 gal. 60 gal.   -
Regulations  EPA, SPCC & NPDES  EPA, SPCC & NPDES EPA, SPCC & NPDES  EPA, SPCC & NPDES  EPA, SPCC & NPDES EPA 40 CFR 264.175,
SPCC & NPDES 

 

POLY-SPILLPAD-1POLY-SPILLPAD™

Keep the floor clean with Poly-Spillpad! Handles spent batteries, 5-gallon pails, 16-gallon drums, and the messiest of “smaller” jobs.POLY-SPILLPAD-2 Sturdy inner polyethylene grate provides protection while vinyl berm keeps incidental spills contained. Poly-Spillpad is lightweight and easily moved. Great on your plant floors or to prevent incidental spills on the go! The large sump area allows for an extended response time.

  •  Removable 100% polyethylene grate allows easy access to the sump.

 

 

 Poly-Spillpad™  
Part Number 5600-YE 5610-YE 5620-YE
Dimensions 24”x24”x2” 48”x24”x2” 48”x48”x2”
Weight 11 lbs. 20 lbs. 40 lbs.
Regulations

EPA, SPCC
& NPDES

EPA, SPCC
& NPDES

EPA, SPCC
& NPDES

 

FLEXPAL epa2

Where Rigid And Flexible Meet

The versitility of portable containment meets the durability of the classic spill pallet with the all-new ENPAC Flexpal™. Available in multiple variations and sizes, these units have the accessibility of fabric combined with the strength of rigid pallets ENPAC is known for producing worldwide. The unique platform design keeps drums out of the spill and allows access to the sump for easy clean-up. Perfect for use with the Poly-Ramp™ to make movement of drums a breeze!

When not in use, simply lift from platforms and decontaminate for storage virtually anywhere! Save on time and shipping with a manageable box that will ship small package for most models and takes just minutes to set up!

 save-on

 

 1-Drum FlexPal™2-Drum FlexPal™4-Drum FlexPal™6-Drum FlexPal™8-Drum FlexPal™
Part Number                  4401-BK 4402-BK 4404-BK  4406-BK 4408-BK
w/Drain 4401-BK-D 4402-BK-D 4404-BK-D 4406-BK-D   4408-BK-D
Dimensions
25”L x 25”W x 12”H  58”L x 25”W x 12”H  58”L x 58”W x 12” H 82”L x 58”W x 12”H 107”L x 58”W x 12”H
Weight  30 lbs. 42 lbs. 77 lbs.  110 lbs.  140 lbs.
Sump Capacity 38 gal.  68 gal. 130 gal. 195 gal. 260 gal.
Regulations

EPA 40 CFR 264.175,
SPCC & NPDES

EPA 40 CFR 264.175,
SPCC & NPDES

EPA 40 CFR 264.175,
SPCC & NPDES

 

EPA 40 CFR 264.175,
SPCC & NPDES

EPA 40 CFR 264.175,
SPCC & NPDES

 

epa2Prowler-Pool-1Prowler Pool™

The Easiest, Lightest Spill Containment Pool Available

Prowler Pop-up Pools™ offer excellent resistance to the widest range of chemicals, acids, fuels, and other hazardous materials. They are also resistant to abrasions, punctures, UV Rays, and cold temperatures as low as –60˚ F. The Prowler is half the weight of comparably sized pools while offering twice the strength. Fits easily into spill response kits.

Prowler-Pool-2

 

 

 

 

 

 

POLY-EDGE-3POLY-EDGE-2POLY-EDGE™

Multi-Functional Storage Unit Offers Transportable Convenience

The Poly-Edge™ can be used as a truck-mounted carrier spill response unit or wall-mounted unit in such applications as manufacturing facilities, laboratories and hospitals. The lockable, large capacity unit offers versatile storage for tools and absorbents as well as ENPAC® Stinger Berms™ and Prowler™ Pools.

  •  Will not rust or corrode
  •  Slotted footprint makes mounting easy
  •  Available in black and yellow
  •  Constructed of lightweight 100% polyethylene
  •  A special weather and water-resistant gasket keeps stored items dry

 

epa2

 

 

Hazmat Pool™

prowler-pool3

 

The Hazmat Pool™ is an inexpensive, quick deployment pool that is small enough to be stored on any truck or emergency response vehicle. Decontaminate for reuse or discard according to regulations. Hazmat Pool™ has excellent puncture abrasion and chemical resistance along with a –60˚ F cold crack. With resistance to the widest range of chemicals, and just seconds to set up, the ENPAC® Hazmat Pool™ is your answer to decontamination. Optional drain.

 

 

 

 

 

 

 PROWLER POOL™POLY-EDGE™HAZMAT POOL™
Part Number 5920-YE 5966-YE 5900-YE 5950-YE

1601-BK (black)
1601-YE (yellow)

5901-YE
w/Drain - - - - 5901-YE-D
w/Drain - - - - -- -
  - - - - -

Dimensions
(Base x Top x Height)

28” x 18” x 13” 48” x 36” x 14” 48” x 32” x 18” 60” x 44” x 18” 35”x20”x16” 74” x 67” x 8”
Weight 2 lbs. 3 lbs. 5 lbs. 5 lbs. 14 lbs. 5 lbs.
Sump Capacity 20 gal. 66 gal. 100 gal. 150 gal. 75 lbs. 100 gal.
Regulations EPA, SPCC & NPDES EPA, SPCC & NPDES EPA, SPCC & NPDES EPA, SPCC & NPDES -

EPA 40 CFR 264.175,
SPCC & NPDES

 

 dripillow-berm-1Dripillow Berm™

Dripillow Berm™ comes in four sizes to capture small leaks and drips. With it’s stable weighted base, it will not flip or splash in windy or harsh weather conditions. Designed to be utilized as a durable and portable drip-pan, it is usable with all fuels and hydrocarbons. Dripillow comes with a UV protected pad and can be folded for easy carrying. Eliminates nuisance drips under vehicles, hydraulic lines, or equipment. Replaceable UV Resistant Pads available for reorder. (Safety yellow is standard. Other colors available by request).

  •  No flipping or splashing
  •  Weighted unit can handle 40 mph winds
  •  Folds for easy carrying
  •  Replaceable UV protected pad available
 *Replacement pads for DripillowBerm ™ five per box. 5655-WH for small, 5665-WH for medium, 5675-WH for large, 5685-WH for x-large.

 

Part Number                 Dimensions                               Weight                         Sump Capacity                    
Small                5650-YE 22” L x 22 W ” x 3” H 7 lbs.  1 gal.
Medium 5660-YE 24” L x 36” W x 3” H 8 lbs. 2 gal.
Large 5670-YE 24” L x 54” W x 3” H 9 lbs. 3 gal.
X-Large 5680-YE 24” L x 54” W x 3” H 9 lbs. 4 gal.

 *Replacement pads for DripillowBerm ™ five per box. 5655-WH for small, 5665-WH for medium, 5675-WH for large, 5685-WH for x-large .


dripillow-berm-2

STINGER RAIL BERM ™

Designed To Provide Portable Spill Containment And Control For Bottom Loading And Unloading Rail Tank Cars! This lightweight containment pad is designed to provide a temporary bermed containment area around the valves below a rail tank car during loading/unloading operations. At only 80 lbs., it can be easily lifted into place by two operators! The berm provides a 4’ x 4’ x 12” sump area that sits in the void between the tracks directly under the valves. Should a large release occur, captured liquid would begin to fill this berm. The spilled product would then be directed over the outside rail to an alternate compartment 4’ x 18” x 12” H. This outside compartment is fitted with two 2” drains that includes a male CAM-LOC fitting for quick coupling of system to hoses that can transport the spilled materials to a nearby containment area.

 

 Part NumberDimensions      Weight               Sump Capacity                 Regulations                      
Rail Berm           48-RSB-FS 4’ L x 6’ W x 1’ H 40 lbs. 120 gal. EPA, SPCC and NPDES

 

dripillow-berm-3

Stinger Yellow Jacket ™

Carry this lightweight, portable pallet anywhere and prevent spills from occurring. Made of vinylcoated polyester, it is chemical-resistant and stands up to corrosive battery acid. It is also a great addition to any Spill Kit! Stop storing truck, automobile, and small forklift batteries on the ground or wooden pallets. Order optional polyethylene grates–removable for easy access to the sump. Stinger Yellow Jacket™ folds up for compact storage and transport. Unique snap-up support stays create a sturdy sidewall when unit  is opened. Excellent for decontamination applications. (Cold rated to -30˚F/- 34˚C.)

 

Part Number           Dimensions               Weight              Sump Capacity            Regulations         
5700-YE 4’ L x 4’ W x 8” H 15 lbs. 80 gal. EPA 40 CFR 264.175, SPCC and NPDES
5706-YE 6’ L x 6’ W x 8” H 24 lbs. 180 gal. EPA 40 CFR 264.175, SPCC and NPDES
5708-YE 10’ L x 10’ W x 8” H 36 lbs. 501 gal. EPA 40 CFR 264.175, SPCC and NPDES
5710-YE 6’ L x 4’ W x 8” H 18 lbs. 120 gal. EPA 40 CFR 264.175, SPCC and NPDES
5720-YE 8’ L x 4’ W x 8” H 28 lbs. 160 gal. EPA 40 CFR 264.175, SPCC and NPDES
5730-YE 8’ L x 8’ W x 8” H 31 lbs. 320 gal. EPA 40 CFR 264.175, SPCC and NPDES
5740-YE 10’ L x 8’ W x 8” H 38 lbs. 400 gal. EPA 40 CFR 264.175, SPCC and NPDES

epa2

 

stinger-snapStinger Snap-up Berm™

The worldwide leader in large, agressive and immediate spill response. The ENPAC® Stinger Berm™ leads the industry
with its wide range of sizes and capacities for large-scale spill containment. Stinger Berms feature excellent rip, tear, and puncture resistance for the most demanding application or terrain. Ground Pad and TracMat™ provide additional protection.

  •  Easy to assemble snap-up design permits immediate response
  •  Compact storage and transport
  •  Air-lance tested containment welds for maximum product performance
  •  Lap joint welds for maximum strength
  •  Individual serial numbers
  •  CAD designed and cut components
  •  Fuel/chemical resistant containment area
  •  Custom sizes and special materials available
  •  Cold rated to -30˚F/-34˚C
  •  Available in Arctic Grade

 

Part Number        Dimensions                      Weight                 Sump Capacity                     Regulations                        
4801-BK-SU 4’ L x 4’ W x 8” H 11 lbs. 79 gal. EPA, SPCC, NPDES
4802-BK-SU 4’ L x 4’ W x 1’ H 25 lbs. 119 gal. EPA, SPCC, NPDES
4803-BK-SU 6’ L x 4’ W x 8” H 18 lbs. 119 gal. EPA, SPCC, NPDES
4804-BK-SU 6’ L x 4’ W x 1’ H 28 lbs. 179 gal. EPA, SPCC, NPDES
4805-BK-SU 8’ L x 4’ W x 8” H 21 lbs. 159 gal. EPA, SPCC, NPDES
4806-BK-SU 6’ L x 6’ W x 1’ H 36 lbs. 269 gal. EPA, SPCC, NPDES
4807-BK-SU 8’ L x 8’ W x 8” H 35 lbs. 319 gal. EPA, SPCC, NPDES
4810-BK-SU 10’ L x 10’ W x 1’ H 60 lbs. 748 gal. EPA, SPCC, NPDES
4812-BK-SU 12’ L x 12’ W x 1’ H 80 lbs. 1,077 gal. EPA, SPCC, NPDES
4816-BK-SU 16’ L x 16’ W x 1’ H 113 lbs. 1,914 gal. EPA, SPCC, NPDES
4820-BK-SU 26’ L x 10’ W x 1’ H 122 lbs. 1,944 gal. EPA, SPCC, NPDES
4836-BK-SU 36’ L x 12’ W x 1’ H 170 lbs. 3,231 gal. EPA, SPCC, NPDES
4850-BK-SU 50’ L x 15’ W x 1’ H 268 lbs. 5,610 gal. EPA, SPCC, NPDES
4854-BK-SU 54’ L x 14’ W x 1’ H 252 lbs. 5,654 gal. EPA, SPCC, NPDES
4860-BK-SU 60’ L x 12’ W x 1’ H 285 lbs. 5,385 gal. EPA, SPCC, NPDES
4866-BK-SU 66’ L x 14’ W x 1’ H 337 lbs. 6,911 gal. EPA, SPCC, NPDES
4885-BK-SU 85’ L x 14’ W x 1’ H 500 lbs. 8,901 gal. EPA, SPCC, NPDES

 

epa2Stinger Snap-Foam Berm™

True Drive In / Drive Out Capability

stingerAfter one-time setup, the ENPAC® Snap-Foam Berm™ allows for continual drive in and out without ever having to set down the end sidewalls. The Foam Sidewall system consists of (PE) polyethylene foam encased in a fuel and chemical resistant membrane cover. The end sidewall design incorporates high strength connectors and a system that facilitates automatic entry and exit without assistance. The foam logs utilize this system so tankers may move at will. The Snap-Foam Berm™ is manufactured and tested to the most stringent quality controls. The Snap-Foam Berm™ is made of the highest quality material in the industry. Custom sizes available, stinger2standard color is black.

 

  •  True drive in/drive out capability
  •  Easy-to-assemble design permits immediate response
  •  Compact storage and transport
  •  Air-lance tested containment welds for maximum product performance
  •  Foam end caps form system to snap end sidewalls back to their upright position
  •  Cold rated to -30˚F/-34˚C
  •  Lap joint welds for maximum strength
  •  Individual serial numbers
  •  CAD designed and cut components
  •  Fuel/chemical resistant containment area
  •  Custom sizes and special materials available

 

 

Part NumberDimensions         Weight      
        Sump Capacity         
                           Regulations                              
4820-BK-SF 10’ L x 26’ W x 1' H 142 lbs. 1,944 gal. EPA, SPCC and NPDES
4836-BK-SF 12’ L x 36’ W x 1' H 198 lbs. 3,231 gal. EPA, SPCC and NPDES
4854-BK-SF 14’ L x 54’ W x 1' H 252 lbs. 5,654 gal. EPA, SPCC and NPDES
4860-BK-SF 12’ L x 60’ W x 1' H 293 lbs. 5,385 gal. EPA, SPCC and NPDES
4885-BK-SF 14’ L x 85’ W x 1' H 475 lbs. 8,901 gal. EPA, SPCC and NPDES

 

 

 

STINGER-SPILLPALSTINGER SPILLPAL™

With Removable Foam Sidewalls Your Instant Containment Berm Answer

When time and space are important to on-the-job containment of leaks and spills, ENPAC’s Removable Foam Spillpal will come to the rescue!

Available in standard and custom sizes, ENPAC® ensures the right berm for every containment need. 4.5” foam sidewalls increase versatility with sturdy construction and a drive in and out feature; Keeping the job moving while not sacrificing safety or compliance. The sidewall design incorporates high strength connectors and a two way air relief system that facilitates automatic entry/exit without assistance.

STINGER-SPILLPAL-2

 Lightweight and durable foam logs
can be driven over at any angle.
High chemical resistance allows for easy,reliable spill containment.STINGER-SPILLPAL5

 

STINGER-SPILLPAL3

 

 

 

STINGER-SPILLPAL-4

 

 

 

 

SizeMaterialPart NumberDimensionsSump CapacityWeightGround Pad#TracMat#
12’ x 15’ Economy 4901-YE 12’ W x 15’ L x 4.5” H 505 gal. 47 lbs. 4901-GP                 4901-TM
Standard 4901-BK 12’ W x 15’ L x 4.5” H 505 gal. 58 lbs.
Heavy Duty 4901-TN 12’ W x 13’ L x 4.5” H 438 gal. 61 lbs.
12’ x 20’ Economy 4902-YE 12’ W x 21’ L x 4.5” H 707 gal. 56 lbs. 4902-GP                  4902-TM
Standard 4902-BK 12’ W x 21’ L x 4.5” H 707 gal. 70 lbs.
Heavy Duty 4902-TN 12’ W x 19’ L x 4.5” H 640 gal. 75 lbs.
12’ x 30’ Economy 4903-YE 12’ W x 33’ L x 4.5” H 1110 gal. 84 lbs. 4903-GP                  4903-TM
Standard 4903-BK 12’ W x 33’ L x 4.5” H 1110 gal. 105 lbs.
Heavy Duty 4903-TN 12’ W x 30’ L x 4.5” H 1010 gal. 112 lbs.
12’ x 40’ Economy 904-YE 12’ W x 39’ L x 4.5” H 1310 gal. 112 lbs. 4904-GP                  4904-TM
Standard 4904-BK 12’ W x 39’ L x 4.5” H 1310 gal. 140 lbs.
Heavy Duty 4904-TN 12’ W x 41’ L x 4.5” H 1380 gal. 150 lbs.
12’ x 50’ Economy 4905-YE 12’ W x 51’ L x 4.5” H 1715 gal. 140 lbs. 4905-GP                  4905-TM
Standard 4905-BK 12’ W x 51’ L x 4.5” H 1715 gal. 175 lbs.
Heavy Duty 4905-TN 12’ W x 52’ L x 4.5” H 1750 gal. 185 lbs.
12’ x 60’ Economy 4906-YE 12’ W x 63’ L x 4.5” H 2121 gal. 168 lbs. 4906-GP                  4905-TM
Standard 4906-BK 12’ W x 63’ L x 4.5” H 2121 gal. 210 lbs.
Heavy Duty 4906-TN 12’ W x 63’ L x 4.5” H 2121 gal. 223 lbs.
24’ x 40’ Economy 4907-YE 24’ W x 39’ L x 4.5” H 2626 gal. 224 lbs. 4907-GP                   4907-TM
Standard 4907-BK 24’ W x 39’ L x 4.5” H 2626 gal. 280 lbs.
Heavy Duty 4907-TN 24’ W x 41’ L x 4.5” H 2760 gal. 310 lbs.
24’ x 50’ Economy 4908-YE 24’ W x 51’ L x 4.5” H 3434 gal. 272 lbs. 4908-GP                   4908-TM
Standard 4908-BK 24’ W x 51’ L x 4.5” H 3434 gal. 340 lbs.
Heavy Duty 4908-TN 24’ W x 52’ L x 4.5” H 3501 gal. 360 lbs.
24’ x 60’ Economy 4909-YE 24’ W x 63’ L x 4.5” H 4241 gal. 328 lbs. 4909-GP                  4909-TM
Standard 4909-BK 24’ W x 63’ L x 4.5” H 4241 gal. 410 lbs.
Heavy Duty 4909-TN 24’ W x 63’ L x 4.5” H 4241 gal. 435 lbs.

 

Tracmat-1TRACMAT™

When placed inside the berm, Tracmat™ allows trucks to drive in and out while protecting the berm from punctures and tears. Available in sizes and dimensions to match any style Stinger Berm™.

 

 

BERM-Accessories
BERM ACCESORIES GROUND PAD

Protect berms from truck wheels or rough terrain. ENPAC® offers the super-tough round Pad. Place under the berm directly on the ground and it will prevent underside punctures from sharp objects.

 


storage-and-transport-bag-1
STORAGE AND TRANSPORT BAG

Heavy duty chemically resistant bag for ease in maneuverability and storage.

 

 

 

 

For Berm:
4’ x 6’6’ x 6’10’ x 10’12’ x 12’16’ x 16’10’ x 26’12’ x 36’15’ x 50’14’ x 54’12’ x 60’14’ x 66’14’ x 85’
TracMat #
4804-TM
(2,3’x6’)   
4806-TM
(2,3’x6’)
4810-TM
 (2,3’x10’)   
4812-TM
(2,3’x12’)
4816-TM
(2,3’x16’)
4820-TM
(2,3’x26’)
4836-TM
(2,3’x36’)
4850-TM
 (2,3’x50’)    
4854-TM
(2,3’x54’)
4860-TM
(2,3’x60’)    
4866-TM
(2,3’x66’)    
4885-TM
(2,3’x85’)    
Ground Pad#   
4804-GP 4806-GP  4810-GP 4812-GP 4816-GP 4820-GP 4836-GP 4850-GP 4854-GP 4860-GP    4866-GP    4885-GP
Storge Bag                 - - 4810-BAG                                       4820-BAG    4836-BAG    - 4854-BAG       -       - 4885-BAG

 

STANDARD BERM KIT

standard-berm-1

DELUXE BERM REPAIR KIT

deluxe-berm            deluxe-berm.2jpg

Contents:

  • (1) Leister Professional Heat Gun
  • XR Material 1 sq. yd. (Black)
  • PVC material 1 sq.yd. (Yellow)
  • (4) Replacement Berm Stays
  • (5) Peel and Stick Berm Patches
  • (1) Rubber Brayer Roller
  • (1) Cutting Knife
  • (1) Locking Tool Box
  Berm Repair Kit  Deluxe Berm Repair Kit
Part Number
 48-BRK   48-BRK-DLX-12 48-BRK-DLX-8
 Description  (5) 8” x 11”
peel and stick sheets
3’x6’ for 12” side walls for 8” side walls
Weight
1 lbs. 3.5 lbs. 15 lbs. 15 lbs.