STORM DRAIN PROTECTION

DRAIN BAG - STANDARDDRAIN-BAG---STANDARD

For Trash, Debris, Sediment, and Oil

DRAIN-BAG---STANDARD-1Standard Model — removes up to .92 gallons of hydrocarbons as well as sediment, dirt, and other contaminants.

Keep Oil, Sediment, and Other Pollutants From Entering the Storm Drain Systems with Drain Bag Catch Basin inserts.

  •  Pollutants in stormwater have become a major concern on a national level. Drain Bag Catch Basin Inserts remove contaminants from stormwater before it reaches the water system
  •  More than 80% sediment removal
  •  Helps comply with 40 CFR 122.26 and NPDES

 

 

 

Designed for practical use in:

Industrial Facilities - keep oil and other contaminants from entering storm drains. Construction Sites - capture eroded soil and wind-blown debris, along with sediment Parking Lots, "Drive-Up" Retail Facilities - selected geotextiles collect oil, fuel and other contaminants that drip from cars

Part NumberDescription   Sediment Capacity      Oil Capacity         Dimensions              Weight      
DRAIN BAG STANDARD MODEL
17C-DB-S Trash, Debris, & Sediment 50 lbs. .92 gal.     36” x 48” x 18”      1 lbs.
17C-DB-S-6060 Trash, Debris, & Sediment 50 lbs. .92 gal. 60” x 60” x 18” 1 lbs.

DRAIN-BAG---OIL-PLUS-MODELDRAIN BAG - OIL PLUS MODEL

When removing oils from stormwater is the top priority, the Drain Bag Oil PLUS model is the universal catch basin insert that does the job. The proprietary oil removal pillow in this unit is made with a custom blend of absorbents that specialize in removing light oils commonly found in industrial stormwater.

 

 Designed for practical use in:

Industrial Facilities - keep oil and other contaminants
from entering storm drains.

Construction Sites - capture eroded soil and wind-blown
debris, along with sediment

Parking Lots, "Drive-Up" Retail Facilities - selected
geotextiles collect oil, fuel and other contaminants that
drip from cars

 

Part NumberDescriptionSediment CapacityOil CapacityDimensionsWeight
DRAIN BAG OIL PLUS MODEL
17C-DB-OP         Trash, Debris, Sediment, & Oil          50 lbs. 2.21 gal. 36” x 48” x 18” 2 lbs. 
17C-DB-OP-6060 Trash, Debris, Sediment, & Oil 50 lbs. 2.21 gal. 60” x 60” x 18” 2 lbs.
*Custom sizes and shapes are available upon request.

 

Protect storm drain inlets from contaminants
such as: trash, debris, oils, & sediment.

DRAIN-BAG---STANDARD

 

 

STORMGUAR

*PATENT PENDING

 

STORMGUARD™

Trash, Debris, & Sediment Model

  •  Helps you comply with NPDES, 40 CFR 122.26 (1999) and TMDL (Total Maximum Daily Load) Requirements
  •  Each StormGuard™ Trash, Debris, & Sediment Model is capable of collecting over 50 lbs. of solids
  •  Frame can be reused to further reduce job costs

Great For Use In:

  •  Industrial facilities
  •  Construction sites
  •  Parking lots
  •  Drive-up retail facilities

     

                          StormGuard Oil & Sediment PLUS

StormGuard-Oil--Sediment-PLUS
StormGuard Oil & Sediment PLUS Model
has a proprietary oil absorbent pillow made with a unique media capable of absorbing light oils found in stormwater

 

 

 

 

StormGuard-Oil--Sediment-PLUS2

 

Part NumberDescriptionSediment
Capacity
Oil CapacitySkirt Dimensions
(LxWxH)
Frame
Dimensions
Weight
SG-TDS-1824 StormGuard™ CBI, Trash-Debris-Sediment, Bag and Frame 50 lbs. .92 gal. 45” x 34” x 16”  18” x 24” 1 lbs.
SG-TDS-2024 StormGuard™ CBI, Trash-Debris-Sediment, Bag and Frame 50 lbs. .92 gal. 45” x 34” x 16” 20” x 24” 1 lbs.
SG-OR-1824 StormGuard™ CBI, Oils-Trash-Debris- Sediment, Bag and Frame  50 lbs. 2.21 gal. 45” x 34” x 16” 18” x 24” 2 lbs. 
SG-OR-2024 StormGuard™ CBI, Oils-Trash-Debris- Sediment, Bag and Frame 50 lbs. 2.21 gal. 45” x 34” x 16” 20” x 24” 2 lbs.
*Custom sizes and shapes are available upon request.

DRAIN-BAG---STANDARD

STORMGUARD™ HEAVY METAL REMOVAL MODEL

Catch Basin Inserts

STORMGUARD-HEAVY-METAL-REMOVAL-MODEL-2

 

Filter heavy metal contaminants from stormwater as it enters your stormdrains with the Storm Guard Heavy Metal Removal Model

STORMGUAR--HEAVY-METAL-REMOVAL-MODEL

 

 

 

 

 

 

Part NumberDescriptionSediment
Capacity
Oil CapacitySkirt Dimensions
(LxWxH)
Frame
Dimensions
Weight
SG-HM-1824 StormGuard™ CBI, Heavy Metal,
Bag and Frame
50 lbs. 2.21 gal. 45” x 34” x 16” 18” x 24”  
SG-HM-2024 StormGuard™ CBI, Heavy Metal,
Bag and Frame
50 lbs. 2.21 gal. 45” x 34” x 16” 20” x 24”  
*Custom sizes and shapes are available upon request.

STORM SENTINEL™

- Adjustable Catch Basin Insert

The Storm Sentinel™ Drain Protection Inserts help companies comply with Stormwater Pollution Prevention Plans and Stormwater Best Management Practices by protecting your storm drains and catch basins. It is the sure way to catch oil and sediment headed into storm drains and sewers. Equipped with an oil-absorbent media in a screened bag, the Storm Sentinel™ guards against any potential discharge.STORM-SENTINEL

  • 1341 & 1344 fit any size rectangular catch basin’s from 16”x20” to 28”x36”. XL version fits rectangular catch basin’s up to 42”x42”
  • 1340 & 1343 fit any size round catch basin’s from 27” to 29” in diameter
  • Up to 500 GPM overflow rate helps avoid ponding
  • Requires no special tools to install
  • Helps comply with NPDES, 40 CFR 122.26 when used as Best Management Practice in Storm Water Pollution Prevention Plans
  • U.S. Patent No. 7,201,843
  • Custom sizes available

Insert won’t fall into the basin, even when fully loaded.  Dispose of the used insert
according to company policy and all applicable laws and regulations.

Great For Use In:

  • Industrial facilities
  • Construction sites
  • Parking lots
  • Drive-up retail facilities

STORM-SENTINEL2

 

Round, 27” to 29”
       Trash & Debris     
       Trash, Sediment & Debris       
   Trash, Sediment, Debris, Oils, & Hydrocarbons   
Part Number     1340-TD 1340 1343
Weight 2 lbs. 2 lbs. 3 lbs.
Rectangular, 16”x20” to 28”x36”
Part Number 1341-TD 1341 1344
Weight 2 lbs. 2 lbs. 4 lbs.
XL Rectangular, 25”x25” to 42”x42”
Part Number 1341-TD-XL 1341-XL 1344-XL
Weight 3 lbs. 3 lbs. 4 lbs.

 DRAIN-BAG---STANDARD


STORM-SENTINEL12

STORM SENTINEL™

- Adjustable Curb Inlet Insert

Adjustable Curb Inlet Insert is designed and engineered to perform to the same demanding test requirements as our award winning Catch Basin Inserts. You can now have the same high quality inserts for Curb Inlet situations. Adjustable to fit curb inlet openings from 24” to 30” wide.

 

Part NumberTypeFits DrainWeight
Storm Sentinel - Curb Inlet Insert
1346-TD Trash & Debris 24”-30”  2 lbs.
1346 24”-30” 2 lbs.
1346-OH
24”-30” 2 lbs.
1346-OH Trash, Debris, Sediment, Oils &
Hydrocarbons
24”-30” 2 lbs.
Storm Sentinel - Drain Dam
1345 (2 pack) Sediment Model Any 6 lbs
Storm Sentinel - Drain Dam
ENP IE0077 Non-leaching Hydorcarbons Model Any 30/cas

 

SCI-GRATE-HOOKSCI GRATE HOOK

The SCI Grate Hook is a heavy duty steel hook that fits all grates and protects hands from injury.

 

Part Number
DimensionsWeight
SCI-GH 31” X 5” 4 lbs.

 

 

 

 

 

 

SCI DRAIN SEALSCI-DRAIN-SEAL1


The dual-durometer urethane composition makes the SCI Drain Seal a highly effective barrier that protects drains from a variety of hazardous materials. Approved for use with fuels and chemicals, the SCI Drain Seal provides a sticky and tight seal that prevents hazmat liquids from reaching the drain and precious surface water. Easy to deploy, easy to clean and it’s reusable!

SCI-DRAIN-SEAL-1Durable and Easy-to-use

The SCI Drain Seal is made of a solid tough polyurethane. Simply revome the SCI Drain Seal from packaging and blanket the drain. The urethane material will “weep” into cracks and crevices completely sealing off the drain inlet.

Reusable

After using, simply wash the SCI Drain Seal, replace the plastic film, roll it and return it to the original container. The SCI Drain Seal is durable enough to handle repeated use.

Chemically Resistant

The polyurethane SCI Drain Seal is compatible for use with a wide range of chemicals and substances than rubbers and plastics. It is often more suitable when coming into contact with certain solvents, oils and chemicals. Plus, it’s environmentally safe.

 

Simple to deploy - Remove from box, stick it down, clean it off, finally return it to box to be used next time

SCI-DRAIN-SEAL2

 SCI-DRAIN-SEAL3

Compatible With:

Methanol, Ethanol, Petroleum Heavy Cat Crack, Petroleum 95 Octane Reformate, JP-4, JP-5, Diesel Fuel, Kerosene, Hydraulic Fluid, Mineral Spirits, Methyl Ethyl Kerone, Acetone, ASTM Fuel B, ASTM Fuel C, Gasoline/Leaded, Gasoline/Regular Unleaded, Gasoline/Premium Unleaded, Aviation Gas, Crude Oil, Fuel Oil, Naptha, Methyl Tertiary Bury Ether, Tulene.

 

 

 

 

Part Number             Dimensions            Weight    
Circluar
22-DS-C12 12” dia. 4 lbs.
22-DS-C20 20” dia. 7 lbs.
22-DS-C30 30” dia. 12 lbs.
22-DS-C40 42” dia. 20 lbs.
Part Number               Dimensions            Weight    
Square
22-DS-1818 18” x 18” 8 lbs.
22-DS-2424 24” x 24” 11 lbs.
22-DS-3636 36” x 36” 16 lbs.
22-DS-4242 42” x 42” 28 lbs.
22-DS-4848 48” x 48” 33 lbs.

 

epa-swpp-npdes

 Dandy-BagDandy-Bag2Dandy Bag® 
Expert Filtration for Sediment-Laden Storm Water

 This patented flagship bag is designed to take a lot of hard knocks. Use the Dandy Bag with flat grates (including round) and mountable curbs to filter out all the sludgy sediment-laden storm water. The suspended solids are allowed to settle out of the slowed flow and are captured by the Dandy Bag prior to entering the inlet, ensuring you regulatory compliance performance.

  •  Unique, patented design keeps silt, sediment, and debris out of storm systems
  •  Reduces or eliminates the need to flush or clean inlets
  •  Easily seen because it’s fabricated from a bright orange monofilament geotextile
  •  Sizes built to fit any inlet in any municipality
  •  Very easy to install, maintain, inspect
  •  Can be re-used

Dandy-SackDandy Sack® 
- Designed to Hang Underneath a Storm Grate

The incredibly strong open-top bag is specially designed to hang underneath a storm grate to expertly filter the thickest sediment-laden storm water. The suspended solids are allowed to settle out of the slowed flow and are conveniently captured by the Dandy Sack prior to entering the inlet.

 

  •  Super easy installation. No rebar required
  •  Internal straps cradle the grate for added support and security when installing and removing
  •  Two-foot containment area is manageable
  •  Easily seen because it’s fabricated from a bright orange monofilament geotextile
  •  Available in three standard sizes to fit any variety of inlets
  •  Available with optional oil absorbents

Dandy-Curb-BagDandy Curb Bag®
- Separates Silt From Storm Water

Patented and designed for use on curb and gutter inlets, the Dandy Curb Bag filters out the most stubborn sediment-laden storm water. The suspended solids are allowed to settle out of the slowed flow and are captured by the rough and tough Dandy Curb Bag prior to entering the inlet.

 

 

 

  •  Unique patented design keeps silt, sediment, and debris out of storm systems
  •  Designed to quickly conform to the shape of the curb
  •  Built-in protective overflow design
  •  Reduces or eliminates the need to flush or clean inlets
  •  Fabricated from a bright orange monofilament geotextile
  •  Sizes to fit any curb and gutter inlet
  •  Easy to install, maintain, inspect, and reuse 

Dandy-Curb-SackDandy Curb Sack®
- Fits to Any Size Gutter and Curb Inlet

For the best results in gutter and curb inlet filtration, the rugged, patented Dandy Curb Sack. With an open-top design, it fits to any size gutter and curb inlet. Its unique design allows it to filter sediment-laden water with ease. The suspended solids are allowed to settle out of the slowed flow and are captured quickly by the Dandy Curb Sack before entering the inlet.

 

 

 

  •  Unique patented design keeps silt, sediment, and debris out of storm systems
  •  Conforms to shape of curb
  •  Fabricated from a high-visibility monofilament geotextile
  •  Reduces the need to flush/clean inlets
  •  Sizes to fit any curb inlet
  •  Available with optional oil absorbents
  •  Easy to install, inspect, and reuse, saving time and money

 

 Dandy Bag®Dandy Sack®Dandy Curb
Bag®
Dandy Curb Sack®
Part Number     17C-DB3636 17C-DS2424 17C-DS3624 17C-DS4824 17C-DS4836 17C-DCB4836 17C-DCS4848
Dimensions 36” x 36” 24” x 24” 36” x 24” 48” x 24” 48” x 36” 48” x 36” 48” x 48”
  Standard sizes listed, Custom sizes available

 epa-swpp-npdes 

Dandy-Curb1Dandy Curb® - Protect Curb Inlets From Sludge-Filled Rainwater

A study in curb inlet filters durablity is what you’ll get with this Dandy Product. The Dandy Curb is made especially for curb inlets and median inlets without grates. It’s designed to handle the worst that sludge-filled rainwater has to offer, filtering out the slowed flow that is easily captured by the Dandy Curb prior to entering the inlet.

 

  •  Specially designed to quickly conform to the shape of the curb
  •  Built-in protective overflow design
  •  Reduces or eliminates the need to flush or clean inlets, saving time and money
  •  Fabricated from a bright orange monofilament geotextile
  •  Sizes to fit any curb and inlet
  •  Available with optional oil absorbents
  •  Easy to install, maintain, inspect and reuse

Dandy-Dewatering-Bag1Dandy Dewatering Bag®Dandy-Bag2

Control Sediment Discharge Where Water is Being Pumped
When pumped water reaches the Dandy Dewatering Bag, the suspended solids are allowed to settle out of the slowed flow and are captured by the bag. Hassle-free and very convenient.

 

 

  •  Easily installs onto discharge hose
  •  More convenient and easier to use than sediment traps or other alternatives
  •  Available with optional oil absorbents
  •  Available in three standard sizes to fit any job perfectly

Dandy-Pop1Dandy Pop®

- Storm Water Grate Protection
For protecting storm drains and diverting storm water. It’s designed for use with field grates to filter sediment-laden water and pops up in seconds. The Dandy Pop is hassle free, so no more cumbersome silt fence or similar device that either falls down or has infiltration points. The Dandy Pop fully encloses the grate, eliminating sediment infiltration. The suspended solids are allowed to settle out of the slowed flow and are more easily captured prior to entering the inlet.

 

 

  •  Superior patented design keeps silt, sediment, and debris out of storm system
  •  Easily visible to machine operators in field
  •  Unique dome design provides easy cleaning and maintenance
  •  Fabricated from easy-to-see safety orange and black monofilament geotextile
  •  Standard sizes to fit any grate

Dandy-Skimmer1Dandy Skimmer®

Prevent Oil Contamination, Permanently and Continuously
Measuring 22" x 14" x 2,” this uniquely designed screen pillow is filled with a polymer absorbent that has not one but two attached flotation devices. The oil absorbent material inside the skimmer easily captures the oil – permanently and continuously. We all know how difficult oil can be, but the Dandy Skimmer can handle the worst of it.

 

 

  •  Unique polymer absorbent bonds the oil to the polymer matrix and will not release hydrocarbons
  •  Floats on the surface, continuously absorbing oils
  •  Removes oil permanently
  •  Design allows long-term exposure to oil-contaminated water for maximum absorption
  •  Will not create ponding or clogging due to sediment

 

 Dandy Sack®Dandy
Dewatering
Bag®
Dandy Pop®Dandy
Skimmer®
Part Number 17C-DC4 17C-DC6 17C-DC8 17C-DC10 17C-DC12 17C-DC14 17C-DC16 17C-DCB4836 17C-DP3030 17C-DP4040 17C-DP5050 17C-DS
Dimensions  4’ 6’   8’  10’  12’  14’  16’  48” x 36”  30” x 30”  40” X 40” 50” X 50”  one size
  Standard sizes listed, Custom sizes available