CUBIC-YARD-BOXES-1

“Environmentally earnest, 
economically efficient,
ergonomic packing solutions
for hazardous materials”

 

The-Anatomy-of-an-Maverick-Enviro-Pack

 

Feature Benefit:

 

  • Collapsible design; advanced hybrid sidewall construction; stackable when filled
  • Save 28–49% warehouse and shipping space, depending on product used
  • No assembly required Save assembly labor—one person sets up within seconds.
  • No missing components (IE: no duck tape/nails/strapping.) Increase productivity.
  • PP protective woven covering Outdoor storage—no labor to protect container from inclement weather. Eliminate expensive warehouse space.
  • Reduce container spoilage and damaged fiberboard.
  • Pre-installed liners Eliminate damage and lost liners. Increase labor productivity.
  • Integrated covers with velcro and/or ties No lost lids; keeps rain out, secures load during transportation; reduces liability exposure in set up and closure of packaging.
  • Lighter weight than comparable, competing products and come fitted with integrated lift straps
  • Reduce workmans’ compensation; capitalize on entire workforce.
  • Eliminate pallet; hoist by straps, improve material handling.
  • Ship 780 units per 53’ truck Reduce incoming and outgoing freight cost by 28%–49%.
  • Save 28–49% warehouse and shipping space, depending on product used.
  • Incineration and landfill accepted Ship your regulated waste materials to numerous waste facilities.
  • All units tested to PG I standards Ship more regulated materials within North America and/or more lab waste material per container

 

 

 

Product Maverick
Part Number: 96-320555 
Capacity: 1 cu. yrd. 
Dimensions: 36”x36”x36” 
Weight: 29 lbs.
Built-in Liner: 6 mil.
 Pallet Quantity: 40

 

 

THE-COWBOYTHE COWBOY

UN Rated for PGI-1800lbs. / II, III 2400lbs
For Solid Waste, Hazardous Regulated Materials
Sleeve / Scored

Benefits:

  • Pre-Installed liner guarantees the proper installation of the liner ensuring a proper fit, reduces undue stress on the liner due to improper installation and eliminates missing liners
  • Continuous Fiberboard Sleeve scored on two opposing sides provides greater stacking and allows the container to knocked down and lay flat
  • Laminating the fiberboard to the woven coated polypropylene guarantees the board is protected from the elements and increases the overall container strength by as much as 1.25X compared to pocket design containers
  • Patent Pending Optional Sure Fit Truss System eliminates unnecessary side-wall bulge
  • Reduces freight and warehouse cost up to 30% compared to corrugated boxes

 

Product Cowboy
Part Number: 96-320237
Capacity: 1 cu. yrd. 
Dimensions: 36”x36”x36” 
Weight: 20 lbs.
Built-in Liner: 6 mil.
 Pallet Quantity: 25


corralTHE CORRAL

UN Rated for PGI-2000lbs. / II, III 2500lbs
For Solid Waste, Hazardous Regulated Materials
One triple-wall insert per side with lifting straps

Benefits:

  • UN Approved for regulated materials and replaces up to 7, 55-gallon drums
  • Outdoor storage reduces expensive warehouse space
  • Units are transported and moved about affixed to a pallet
  • The lifting straps facilitate discharging of the container
  • Freestanding Design eliminates container set up and is designed to transport regulated solid waste, loaded or discharged by gravity
  • The lightweight design increases the amount of actual material being shipped per truck load and is ergonomically designed to reduce potential strains and worker injury
Product Corral
Part Number: 96-320556C 
Capacity: 1.6 cu. yrd. 
Dimensions: 42”x42”x42” 
Weight: 30 lbs.
Built-in Liner: 6 mil.
 Pallet Quantity: 20

 

mosseTHE MOOSE II

UN Rated for PGI-2500lbs. / II, III 3000lbs
For Solid Waste, Hazardous Regulated Materials
Sleeve / Scored

Benefits:

  • Pre-Installed liner guarantees the proper installation of the liner ensuring a proper fit, reduces undue stress on the liner due to improper installation and eliminates missing liners
  • Continuous Fiberboard Sleeve scored on two opposing sides provides greater stacking capabilities and allows the container to collapse and lay flat
  • Laminating the fiberboard to the woven coated polypropylene guarantees the board is protected from the elements and increases the overall container strength by as much as 1.25(x) compared to pocket design containers
Product Moose II
Part Number: 96-320275
Capacity: 1.6 cu. yrd.
Dimensions: 42”x42”x42” 
Weight: 42 lbs.
Built-in Liner: 6 mil.
 Pallet Quantity: 20

BULK-BAGSBULK BAGS

Bulk Bags, or Flexible Intermediate Bulk Containers (FIBCs), are an economical and efficient way to package, store, and handle products/material. Each Bulk Bag has four loop-style lifting straps on each end for easy handling, filling, and dispensing. Bulk Bags are available in both non-UN and UN-rated styles.

 

 

 

Part Number: 95L-363636Y 
Capacity: 1 cu. yrd. 
Dimensions: 36”x36”x36” 
Weight: 5 lbs.
 Pallet Quantity: 167